DW S3001
It is powered by a 230 volt AC power supply. It is utilised when the load to be regulated is powered by 230 volts alternating current. Simply connect the AC mains line to the sensor's input terminals and the load to the sensor's output terminals. Place the sensing probe next to the door. The load will be automatically managed by opening and closing the door. The sensing probe cable is attached to the main sensor body through a three-pin connector that can be removed during the installation procedure. When connected to a resistive load, it has a maximum load capacity of 400 W. When linked to an inductive/capacitive load, the maximum load capacity is 150 W.
Related Products
